Wi-Sys Antennas

 

3910D Very Low Noise Mobile GPS Antenna

The 3910D GPS antenna has one of the industry's lowest noise fi gures. It features ESD circuit protection, an innovative very low noise LNA and a high rejection SAW filter. It also features a precisely tuned custom ceramic patch element that minimizes detuning effects caused by adjacent objects. The 3910D is ideal for Fleet Management, Asset Tracking and Precision Agriculture as well any appilcation with poor signal reception area. The 3910D provides consistent, clear GPS signal reception while minimizing lossof-lock in high-RF fi elds. Housed in a weatherproof magnetic or screw mount enclosure, the 3910D GPS antenna is ideal for demanding vehicle mounted GPS applications.

Features

• Low noise: 0.5 dB

• Low current: 8mA

• Superior out-of-band rejection

• Wide voltage input range (2.7 - 5 VDC)

• Robust IP67 housing built for various weather conditions

 

3911D-HR High Rejection Dual Filter Mobile GPS Antenna for High RF Noise Environments

The 3911D-HR low interference GPS Antenna with Dual SAW High Rejection Filters allow excellent performance in high RF noise environments as found on vehicles with multiple antennas. It is ideal for fleet tracking, public safety, transit, precision agricultural and military applications.

The 3911D-HR features ESD circuit protection, an innovative two-stage low noise amplifier and a dual SAW high rejection filter. It also features a custom designed ceramic patch element that minimizes detuning effects caused by adjacent objects. The 3911D-HR provides consistent, clear GPS signal reception while minimizing loss-of-lock in high-RF fields. Housed in a weatherproof magnetic or screw mount enclosure, the 3911D-HR GPS antenna is ideal for demanding vehicle mounted GPS applications.

Features:

    * High rejection dual SAW filters allow placement near other transmitting

      antennas

    * Low current: 7.5 mA @ 3.3V

    * Wide voltage input range (2.7 - 5 VDC)

    * Robust IP67 housing built for various weather conditions

 

3915D-HR Low Power GPS Antenna with Dual High Rejection SAW Filters

The 3915D-HR Very Low Power High Rejection GPS Antenna has one of the industry's lowest power consumption and best out-of-band fi lter performance. The 3915D-HR features ESD circuit protection, an innovative very low power two-stage low noise amplifi er and dual high rejection SAW filters. It also features a custom designed ceramic patch element that minimizes detuning effects caused by adjacent objects. The 3915D-HR provides consistent, clear GPS signal reception while minimizing loss-of-lock in high-RF fi elds. Housed in a weatherproof magnetic or screw mount enclosure, the 3915D-HR is ideal for most demanding, power critical GPS applications.

Features:

    * High rejection dual SAW filters allows placement near other transmitting

      antennas

    * Low current: 1.3 mA @ 3.3V

    * 20 dB gain

    * Wide voltage input range (2.7 - 5 VDC)

    * Robust IP67 housing built for various weather conditions

 


3917D High Gain GPS Antenna

The 3917D GPS antenna is a high performance value antenna with a wide voltage range, ideally suited to telematics platforms for use in vehicle-mounted applications. Using internal magnets or screw mount holes, the antenna can be installed almost anywhere on a vehicle allowing for greater flexibility. The 3917D antenna features 28 dB gain low noise amplifier and a SAW filter. With 2.7 to 5 volt operation, the antenna can be used with the vast majority of GPS systems available.

Features:

    * Voltage range 2.7 - 5 V

    * LNA 28 dB gain typical

    * Low noise figure 1.5dB

 

 

3927D Low Cost Magnet Mount GPS Antenna

The 3927D is a low cost magnet mount GPS antenna. It features a precisely tuned ceramic patch antenna, 15KV ESD protection, a two stage Low Noise Amplifier (LNA) and a mid-section SAW filter that provides superior out-of-band signal rejection. Housed in a very compact all plastic weatherproof enclosure, the 3927D can be installed almost anywhere on a vehicle allowing great flexibility. With its 2.7 to 5 volt operation, the 3927D can be used with the vast majority of GPS system available in the marketplace.

Features:

    * All plastic weatherproof housing

    * 26 dB LNA gain @ 3.3V

    * Low noise figure 1.5dB

 

 

3971D Low Noise Permanent Mount GPS Antenna

The 3971D Low Noise Permanent Mount GPS Antenna has one of the industry's lowest noise figure. It features a precision tuned custom ceramic patch element, ESD circuit protection and a high rejection SAW filter. The 3971D provides clear GPS signal reception while minimizing loss-of-lock even in less than ideal conditions. Available in an all-plastic, non-corrosive low profile package for mobile applications with a dark grey or white low profile radome for mobile installations.

Features:

    * Weather proof, all-plastic, non-corrosive, low profile enclosure

    * Very low noise (0.8 dB) LNA

    * 28dB gain @ 3.3V

    * Low current: 8mA @ 3.3V

    * High rejection SAW filter

    * 15 KV ESD

    * ¾ inch thru-hole or bracket mount

    * Voltage range 2.7 to 5.5 V

    * Available in a black or white radome

 

3971D-DH-W Low Noise Permanent Mount GPS Antenna

The 3971D-DH-W Permanent Mount GPS Antenna provides 28 dBd of gain and has one of the industry's lowest noise figures. It provides clear GPS signal reception while minimizing loss-of-lock even in less than ideal conditions and is the optimum choice for GPS Tracking and Timing applications with long cable runs and stand alone GPS applications The 3971D-DH-W features a precision tuned custom ceramic patch element, ESD circuit protection and a high rejection SAW fi lter. Available in an all-plastic, non-corrosive white cone-shaped radome for fixed installations.

Features:

    * Weather proof, all-plastic, non-corrosive, cone-shaped enclosure

    * Unique radome sheds water and ice, while eliminating problems associated

      with bird perching

    * 28dB gain

    * Low current: 8mA (typ)

    * ¾ inch thru-hole or bracket mount

    * Voltage range 2.7 to 5.5 V

 

3977D Permanent Mount GPS Antenna

The 3977D permanent mount GPS Antenna provides 28 dB gain and great out-of-band rejection performance. It features a precision tuned custom ceramic patch element for maximum signal reception and 15KV ESD circuit protection. This enables the 3977D to minimize loss-of-lock, even when conditions are less than ideal. Available in an all-plastic, non-corrosive low profile package for vehicle mounting in a white or dark gray housing.

Features:

    * Weather proof, all-plastic, non-corrosive, low profile enclosure

    * ¾ inch thru-hole or bracket mount

    * Voltage range: 2.7 to 5.5 V

    * High gain: 28 dB

    * Low noise figure: 1.5 dB

    * High out-of-band signal rejection

 

3978D-DH-W High Gain Permanent Mount GPS Antenna

The 3978D-DH-W high gain permanent mount GPS Antenna provides 40 dB gain and great high out-of-band rejection performance and is the optimum choice for GPS Tracking and Timing applications with long cable runs and stand alone GPS applications. It features a precision tuned custom ceramic patch element for maximum signal reception, 15KV ESD circuit protection, a very low noise (0.5 dB) 3 stage LNA circuit and a SAW filter. This enables the 3978D-DH-W to provide a reliable and clear GPS signal while minimizing loss-of-lock, even when conditions are less than ideal. Available in an all-plastic, non-corrosive low profi le package for vehicle mounting.

Features

    * Weather proof, all-plastic, non-corrosive, cone-shaped enclosure

    * ¾ inch thru-hole or bracket mount

    * Unique radome sheds water and ice, while eliminating problems associated

      with bird perching

    * Voltage range: 2.7 to 5.5 V

    * High gain: 40 dB (typical)

    * Low noise figure: 0.5dB

 

3938D Ultra Compact 2.4 GHz Covert Mount Antenna

The 3938D Ultra Compact 2.4 GHz Covert Mount Antenna provides exceptional signal reception on the 2.4 GHz ISM band. The 3938D is composed of an ultra compact semi-flexible coated PCB for covert applications. Ideal for telematics and M2M platforms.

Features:

    * 2.4 GHz ISM Band reception

    * Ultra-compact, semi-flexible PCB

    * Coated PCB or packaged form factor

    * Covert and dash mount

    * Easy to install

    * Side exit cable

 

 

3978D High Gain Permanent Mount GPS Antenna

The 3978D high gain permanent mount GPS Antenna provides 40 dB gain and great high out-of-band rejection performance and is the optimum choice for GPS Tracking and Timing applications with long cable runs and stand alone GPS applications. It features a precision tuned custom ceramic patch element for maximum signal reception, 15 KV ESD circuit protection, a very low noise (0.5 dB) 3 stage LNA circuit and a SAW filter. This enables the 3978D to provide a reliable and clear GPS signal while minimizing loss-of-lock, even when conditions are less than ideal. Available in an all-plastic, non-corrosive low profile package for vehicle mounting.

Features:

    * Weather proof, all-plastic, black, non-corrosive, low profile enclosure

    * ¾ inch thru-hole or bracket mount

    * Voltage range: 2.7 to 5.5 V

    * High gain: 40 dB (typical)

    * Very low noise figure: 0.5dB

 

3947D GPS/Cellular/3G/2.4 GHz Combined Covert/Dash Antenna       

The 3947D GPS, Quad Cellular, 3G & 2.4 GHz ISM Band antenna is an excellent choice for Telematics systems requiring dependable and highly accurate positioning data. It is also ideal for clear and consistent host-to-vehicle communications.

Features:

    * GPS, Quad-band Cellular & 2.4 GHz band reception

    * Semi-flexible for covert installations

    * Excellent out-of-band signal rejection

    * High gain active GPS antenna

    * Easy to install

 

Wi-Sys Embedded GPS Antenna

 

1357D Ultra Compact Embedded GPS Antenna

The Ultra Compact 1357D Embedded GPS antenna is ideal for GPS enabled ruggedized PDAs, laptops and portable GPS Handhelds. The 1357D antenna features a compact ceramic patch element, ESD circuit protection, a low noise amplifier and a SAW filter, enabling the 1357D to provide great outof- band signal rejection performance, consistent and clear signal while minimizing loss-of-lock in an extremely small form factor.

Features

• Ultra compact form factor

• 15 KV ESD circuit protection

• 2.7 to 5 V operation

• Ideal for embedded applications

 

1857D Compact Embedded GPS Antenna

The Compact 1857D Embedded GPS antenna is ideal for GPS enabled ruggedized PDAs, laptops and portable GPS Handhelds. The 1857D antenna features a custom tuned frequency ceramic patch element, ESD circuit protection, a two stage low noise amplifier and a SAW filter, enabling the 1857D to provide great out-of-band signal rejection performance, consistent and clear signal while minimizing loss-of-lock in a very small form factor.

Features

• Very compact form factor

• 15 KV ESD circuit protection

• 2.7 to 5 Volt operation

• Ideal for embedded applications

 

3951D Low Noise Embedded GPS Antenna

The 3951D Embedded GPS Antenna has one of the industry's lowest noise figures. It features a tuned custom ceramic patch element that minimizes detuning effects caused by adjacent objects. It also features ESD circuit protection, an innovative LNA (low noise amplifier) and a high rejection SAW filter which enable a consistent, clear signal while minimizing loss-of-lock even when GPS conditions are less than ideal.

Features

• 15 KV ESD circuit protection

• Low noise figure: 0.5 dB LNA

• Excellent out-of-band signal rejection

 

3957D Embedded GPS Antenna

The 3957D GPS antenna is ideal for ruggedized handheld GPS devices, mobile asset tracking equipment and GPS timing applications. This antenna features a custom designed ceramic patch element, a two-stage low noise amplifier and a SAW filter, enabling it to provide great out-of-band signal rejection performance, consistent and clear signal while minimizing loss-of-lock. The 3957D comes in a compact square package.

Features

• 2.7 - 5 V operation

• 15 KV ESD circuit protection

• Ideal for embedded applications

 

3961D Low Noise Embedded GPS Antenna

The 3961D Embedded GPS Antenna has one of the industry's lowest noise figure. It features a tuned custom ceramic patch element that minimizes detuning effects caused by adjacent objects. It also features ESD circuit protection, an innovative LNA (low noise amplifier) and a high rejection SAW filter which enable these antennas to provide a consistent, clear signal while minimizing loss-of-lock even when GPS conditions are less than ideal. The 3961D comes with a 45.2 mm diameter mini ground plane.

Features

• Comes with internal ground plane

• 15 KV ESD circuit protection

• Low noise figure: 0.5 dB

• Excellent out-of-band signal rejection

 

3967D Embedded GPS Antenna

The 3967D GPS antenna is ideal for ruggedized handheld GPS devices, mobile asset tracking equipment and GPS timing applications. The 3967D features a custom designed ceramic patch element, a two-stage low noise amplifier and a SAW filter, providing great out-of-band signal rejection performance, consistent and clear signal while minimizing loss-of-lock. The 3967D comes with a 1.85" mini-ground plane.

Features

• 2.7 - 5 V operation

• 15 KV ESD circuit protection

• Comes with internal ground plane

• Ideal for embedded applications

 

5012D-CE Embedded High Sensitivity Tracking & Timing GPS Receiver + Antenna       

The 5012D-CE Embedded GPS Receiver + Antenna incorporates a highly sensitive 16-channel, very quick time to fix GPS Receiver as well as a high performance active/filtered GPS antenna. It features the STMicroelectronics STA8058 Teseo™ high performance GPS Engine with embedded flash memory, an LNA, SAW filter, as well as a precisely tuned ceramic patch element for maximum GPS signal reception. The 5012D-CE High Sensitivity GPS Receiver +Antenna is ideal for embedded applications and comes with CMOS flying leads.

Features

• Integrated GPS receiver + antenna (active)

• Very High Sensitivity:-159dBm tracking

• Quick Time to Fix: 39 sec cold start

• 16 channel ST Teseo™ GPS Engine

• Flash memory: upload embedded GPS Firmware, settings & history

• Standard NMEA 0183; GPS output

• 1PPS output: 50n second accuracy

• WAAS and EGNOS supported

• Low current: 80 mA typ., 3.3V operation

• Compact form factor: 25.76 mm square

• Ideal for embedded applications

• RoHS compliant

 

Wi-Sys GPS Receiver and Antenna

 

GPS Receiver + Antenna with Digital Interface RS232 Terminations

The 5012D-RD Series GPS Receiver + Antenna incorporate a 16-channel high sensitivity receiver with fast, first time to GPS fix. This, coupled with position information maintained over power cycles, provides immediate and accurate position reporting. All models in the 5012D-RD series all come with a CMOS to RS232 adapter cable connected by two, 4-pin DIN connectors for ease in installation.

Features

• Plug and Play GPS tracking

• Simple Interface to Data-Ready Radios

• NMEA RMC message output

• Maintains position over power cycles

• RS232 (TTL interface option)

• Magnetic and screw hole mount

• Rugged weatherproof IP67 housing

• Ideal for embedded applications

 

5012D-U Smart GPS Antenna with Integrated Receiver     

The 5012D-U GPS Receiver + Antenna incorporates a highly sensitive 16-channel, very quick time-to-fix GPS Receiver, and a high performance active/filtered GPS antenna. It features high performance GPS Engine with embedded flash memory, a Low Noise Amplifier, SAW filter, as well as a precision tuned ceramic patch element for maximum GPS signal reception. The 5012D-U High Sensitivity GPS Receiver + Antenna is housed in a compact, rugged weatherproof magnet or screw mount enclosure.

Features

• Highly Sensitive: -159dBm tracking

• Quick Time to Fix: 39 sec cold start

• 16 channel GPS Engine

• Standard NMEA 0183 GPS output

• WAAS and EGNOS supported

• Low power & standby modes

• Weatherproof industrial grade enclosure

 

Bluewave Marathon Series

 

BMY806G Series

The BMY806G has been engineered to meet the requirements of a high gain, broadband, premium quality antenna. This antenna provides 6.5 dBd gain and operates in the 806-896 MHz range. The BMY806G is manufactured using high strength 6061-T6 aluminum to withstand heavy ice, high wind and other harsh conditions. The dipole design has an integral feed line and is welded to the boom for extra strength and electrical conductivity. This also eliminates misalignment or fastener problems. The entire antenna is anodized for appearance and corrosion resistance. A heavy duty clamp is supplied which easily permits horizontal or vertical polarization. The BMY806G is available with a variety of connector and cable options.

 

Features:

  • Elements and boom are manufactured from aircraft quality 6061-T6 aluminum for optimum strength
  • Antenna is anodized for corrosion resistance
  • Multiple feed lengths options reduces in-line connector related RF losses, minimizes multiple connector failure points and reduces installation time

 

BMYD1350 Series

The BMYD1350 has been designed to meet the requirements of a high gain, broadband, premium quality antenna, operating in the 1350-1454 MHz range. The BMYD1350 is manufactured using high strength 6061-T6 aluminum to withstand heavy ice, high wind and other harsh conditions. All elements are

welded to the boom and the dipole design has an integral feed line welded to the boom for extra strength and electrical conductivity. This eliminates misalignment or fastener problems. The entire antenna is anodized for appearance and corrosion resistance. A heavy duty clamp is supplied which

easily permits horizontal or vertical polarization.

Features:

  • Elements and boom are manufactured from aircraft quality 6061-T6 aluminum for optimum strength
  • Antenna is anodized for corrosion resistance
  • Antenna is supplied with a 2' pigtail (RG213) and N female connector

 

BMYD403G series

The BMYD403G has been engineered to meet the requirements of a high gain, broadband, premium quality antenna. This antenna provides 6.5 dBd gain and operates in the 403-430 MHz range. The BMYD403G is manufactured using high strength 6061-T6 aluminum to withstand heavy ice, high wind and other harsh conditions. All elements are welded to the boom and the dipole design has an integral feed line welded to the boom for extra strength and electrical conductivity. This eliminates misalignment or fastener problems. The entire antenna is anodized for appearance and corrosion resistance. A heavy duty clamp is supplied which easily permits horizontal or vertical polarization.

Features:

  • Elements and boom are manufactured from aircraft quality 6061-T6 aluminum for optimum strength
  • Antenna is anodized for corrosion resistanceAntenna is supplied with a 2' pigtail (RG213) and N female connector

 

BMYD403K series

The BMYD403K has been engineered to meet the requirements of a high gain, broadband, premium quality antenna. This antenna provides 10 dBd gain and operates in the 403-430 MHz range. The BMYD403K is manufactured using high strength 6061-T6 aluminum to withstand heavy ice, high wind and other

harsh conditions. All elements are welded to the boom and the dipole design has an integral feed line welded to the boom for extra strength and electrical conductivity. This eliminates misalignment or fastener problems. The entire antenna is anodized for appearance and corrosion resistance. A heavy duty clamp is supplied which easily permits horizontal or vertical polarization.

Features:

  • Elements and boom are manufactured from aircraft quality 6061-T6 aluminum for optimum strength
  • Antenna is anodized for corrosion resistance
  • Antenna is supplied with a 2' pigtail (RG213) and N female connector

 

BMYD450G Series

The BMYD450G has been engineered to meet the requirements of a high gain, broadband, premium quality antenna. This antenna provides 6.5 dBd gain and operates in the 450-470 MHz range. The BMYD450G is manufactured using high strength 6061-T6 aluminum to withstand heavy ice, high wind and other

harsh conditions. All elements are welded to the boom and the dipole design has an integral feed line welded to the boom for extra strength and electrical conductivity. This eliminates misalignment or fastener problems. The entire antenna is anodized for appearance and corrosion resistance. A heavy duty clamp is supplied which easily permits horizontal or vertical polarization.

 

Features:

  • Elements and boom are manufactured from aircraft quality 6061-T6 aluminum for optimum strength
  • Antenna is anodized for corrosion resistance
  • Antenna is supplied with a 2' pigtail (RG213) and N female connector

 

BMYD450K Series

The BMYD450K has been engineered to meet the requirements of a high gain, broadband, premium quality antenna. This antenna provides 10 dBd gain and operates in the 450-470 MHz range. The BMYD450K is manufactured using high strength 6061-T6 aluminum to withstand heavy ice, high wind and other

harsh conditions. All elements are welded to the boom and the dipole design has an integral feed line welded to the boom for extra strength and electrical conductivity. This eliminates misalignment or fastener problems. The entire antenna is anodized for appearance and corrosion resistance. A heavy duty clamp is supplied which easily permits horizontal or vertical polarization.

Features:

  • Elements and boom are manufactured from aircraft quality 6061-T6 aluminum for optimum strength
  • Antenna is anodized for corrosion resistance
  • MAntenna is supplied with a 2' pigtail (RG213) and N female connector

 

 

BMYD451K Series

The BMYD451K has been engineered to meet the requirements of a high gain, broadband, premium quality antenna. This antenna provides 10 dBd gain and operates in the 450-490 MHz range. The BMYD451K is manufactured using high strength 6061-T6 aluminum to withstand heavy ice, high wind and other

harsh conditions. All elements are welded to the boom and the dipole design has an integral feed line welded to the boom for extra strength and electrical conductivity. This eliminates misalignment or fastener problems. The entire antenna is anodized for appearance and corrosion resistance. A heavy duty clamp is supplied which easily permits horizontal or vertical polarization.

Features:

  • Elements and boom are manufactured from aircraft quality 6061-T6 aluminum for optimum strength
  • Antenna is anodized for corrosion resistance
  • Antenna is supplied with a 2' pigtail (RG213) and N female connector

 

BMYD451M Series

The BMYD451M has been engineered to meet the requirements of a high gain, broadband, premium quality antenna. This antenna provides 12 dBd gain and operates in the 450-490 MHz range. The BMYD451M is manufactured using high strength 6061-T6 aluminum to withstand heavy ice, high wind and other harsh conditions. All elements are welded to the boom and the dipole design has an integral feed line welded to the boom for extra strength and electrical conductivity. This eliminates misalignment or fastener problems. The entire antenna is anodized for appearance and corrosion resistance. A heavy duty clamp is supplied which easily permits horizontal or vertical polarization.

Features:

  • Elements and boom are manufactured from aircraft quality 6061-T6 aluminum for optimum strength
  • Antenna is anodized for corrosion resistance
  • Antenna is supplied with a 2' pigtail (RG213) and N female connector

 

BMYD690G Series

The BMYD690G has been engineered to meet the requirements of a high gain, broadband, premium quality antenna. This antenna provides 6.5 dBd gain and operates in the 690-746 MHz range. The BMYD690G is manufactured using high strength 6061-T6 aluminum to withstand heavy ice, high wind and other

harsh conditions. All elements are welded to the boom and the dipole design has an integral feed line welded to the boom for extra strength and electrical conductivity. This eliminates misalignment or fastener problems. The entire antenna is anodized for appearance and corrosion resistance. A heavy duty clamp is supplied which easily permits horizontal or vertical polarization. The BMYD690G is available with a variety of connector and cable options.

Features

  • Elements and boom are manufactured from aircraft quality 6061-T6 aluminum for optimum strength
  • Antenna is anodized for corrosion resistance
  • Antenna is supplied with a 2' pigtail (RG213) and N female connector

 

BMYD690K series

The BMYD690K has been engineered to meet the requirements of a high gain, broadband, premium quality antenna. This antenna provides 10 dBd gain and operates in the 690-746 MHz range. The BMYD690K is manufactured using high strength 6061-T6 aluminum to withstand heavy ice, high wind and other harsh conditions. All elements are welded to the boom and the dipole design has an integral feed line welded to the boom for extra strength and electrical conductivity. This eliminates misalignment or fastener problems.The entire antenna is anodized for appearance and corrosion resistance. A heavy duty clamp is supplied which easily permits horizontal or vertical polarization.

Features:

  • Elements and boom are manufactured from aircraft quality 6061-T6 aluminum for optimum strength
  • Antenna is anodized for corrosion resistance
  • Antenna is supplied with a 2' pigtail (RG213) and N female connector
 

 

BMYD690M Series

The BMYD690M has been engineered to meet the requirements of a high gain, broadband, premium quality antenna. This antenna provides 12 dBd gain and operates in the 690-746 MHz range. The BMYD690M is manufactured using high strength 6061-T6 aluminum to withstand heavy ice, high wind and other

harsh conditions. All elements are welded to the boom and the dipole design has an integral feed line welded to the boom for extra strength and electrical conductivity. This eliminates misalignment or fastener problems. The entire antenna is anodized for appearance and corrosion resistance. A heavy duty clamp is supplied which easily permits horizontal or vertical polarization. The

BMYD690M is available with a variety of connector and cable options

Features:

  • Elements and boom are manufactured from aircraft quality 6061-T6 aluminum for optimum strength
  • Antenna is anodized for corrosion resistance
  • Antenna is supplied with a 2' pigtail (RG213) and N female connector
 

 

BMYD690N Series

The BMYD690N has been engineered to meet the requirements of a high gain, broadband, premium quality antenna. This antenna provides 13.5 dBd gain and operates in the 690-746 MHz range. The BMYD690N is manufactured using high strength 6061-T6 aluminum to withstand heavy ice, high wind and other harsh conditions. All elements are welded to the boom and the dipole design has an integral feed line welded to the boom for extra strength and electrical conductivity. This eliminates misalignment or fastener problems. The entire antenna is anodized for appearance and corrosion resistance. A heavy duty clamp is supplied which easily permits horizontal or vertical polarization.

Features:

  • Elements and boom are manufactured from aircraft quality 6061-T6 aluminum for optimum strength
  • Antenna is anodized for corrosion resistance
  • Antenna is supplied with a 2' pigtail (RG213) and N female connector
 

BMYD745G Series

The BMYD745G has been engineered to meet the requirements of a high gain, broadband, premium quality antenna. This antenna provides 6.5 dBd gain and operates in the 745-806 MHz range. The BMYD745G is manufactured using high strength 6061-T6 aluminum to withstand heavy ice, high wind and other harsh conditions. All elements are welded to the boom and the dipole design has an integral feed line welded to the boom for extra strength and electrical conductivity. This eliminates misalignment or fastener problems. The entire antenna is anodized for appearance and corrosion resistance. A heavy duty clamp is supplied which easily permits horizontal or vertical polarization.

Features:

  • Elements and boom are manufactured from aircraft quality 6061-T6 aluminum for optimum strength
  • Antenna is anodized for corrosion resistance
  • Antenna is supplied with a 2' pigtail (RG213) and N female connector
 

BMYD745K Series

The BMYD745K series has been engineered to meet the requirements of a high gain, broadband, premium quality antenna. This antenna provides 10 dBd gain and operates in the 745-806 MHz range. The BMYD745K is manufactured using high strength 6061-T6 aluminum to withstand heavy ice, high wind and other harsh conditions. All elements are welded to the boom and the dipole design has an integral feed line welded to the boom for extra strength and electrical conductivity. This eliminates misalignment or fastener problems. The entire antenna is anodized for appearance and corrosion resistance. A heavy duty clamp is supplied which easily permits horizontal or vertical polarization.

Features:

  • Elements and boom are manufactured from aircraft quality 6061-T6 aluminum for optimum strength
  • Antenna is anodized for corrosion resistance
  • Antenna is supplied with a 2' pigtail (RG213) and N female connector
 

BMYD745M Series

The BMYD745M has been engineered to meet the requirements of a high gain, broadband, premium quality antenna. This antenna provides 12 dBd gain and operates in the 745-806 MHz range. The BMYD745M is manufactured using high strength 6061-T6 aluminum to withstand heavy ice, high wind and other

harsh conditions. All elements are welded to the boom and the dipole design has an integral feed line welded to the boom for extra strength and electrical conductivity. This eliminates misalignment or fastener problems. The entire antenna is anodized for appearance and corrosion resistance. A heavy duty clamp is supplied which easily permits horizontal or vertical polarization.

Features:

  • Elements and boom are manufactured from aircraft quality 6061-T6 aluminum for optimum strength
  • Antenna is anodized for corrosion resistance
  • Antenna is supplied with a 2' pigtail (RG213) and N female connector
 

BMYD806G Series

The BMYD806G has been engineered to meet the requirements of a high gain, broadband, premium quality antenna. This antenna provides 6.5 dBd gain and operates in the 806-896 MHz range. The BMYD806G is manufactured using high strength 6061-T6 aluminum to withstand heavy ice, high wind and other

harsh conditions. All elements are welded to the boom and the dipole design has an integral feed line welded to the boom for extra strength and electrical conductivity. This eliminates misalignment or fastener problems. The entire antenna is anodized for appearance and corrosion resistance. A heavy duty clamp is supplied which easily permits horizontal or vertical polarization.

Features

  • Elements and boom are manufactured from aircraft quality 6061-T6 aluminum for optimum strength
  • Antenna is anodized for corrosion resistance
  • Antenna is supplied with a 2' pigtail (RG213) and N female connector
 

BMYD806K Series

The BMYD806K has been engineered to meet the requirements of a high gain, broadband, premium quality antenna. This antenna provides 10 dBd gain and operates in the 806-896 MHz range. The BMYD806K is manufactured using high strength 6061-T6 aluminum to withstand heavy ice, high wind and other harsh conditions. All elements are welded to the boom and the dipole design has an integral feed line welded to the boom for extra strength and electrical conductivity. This eliminates misalignment or fastener problems. The entire antenna is anodized for appearance and corrosion resistance. A heavy duty clamp is supplied which easily permits horizontal or vertical polarization.

Features:

  • Elements and boom are manufactured from aircraft quality 6061-T6 aluminum for optimum strength
  • Antenna is anodized for corrosion resistance
  • Antenna is supplied with a 2' pigtail (RG213) and N female connector
 

BMYD806M Series

The BMYD806M has been engineered to meet the requirements of a high gain, broadband, premium quality antenna. This antenna provides 12 dBd gain and operates in the 806-896 MHz range. The BMYD806M is manufactured using high strength 6061-T6 aluminum to withstand heavy ice, high wind and other harsh conditions. All elements are welded to the boom and the dipole design has an integral feed line welded to the boom for extra strength and electrical conductivity. This eliminates misalignment or fastener problems. The entire antenna is anodized for appearance and corrosion resistance. A heavy duty clamp is supplied which easily permits horizontal or vertical polarization.

Features:

  • Elements and boom are manufactured from aircraft quality 6061-T6 aluminum for optimum strength
  • Antenna is anodized for corrosion resistance
  • Antenna is supplied with a 2' pigtail (RG213) and N female connector
 

BMYD806O Series

The BMYD806O has been engineered to meet the requirements of a high gain, broadband, premium quality antenna. This antenna provides 14 dBd gain and operates in the 806-896 MHz range. The BMYD806O is manufactured using high strength 6061-T6 aluminum to withstand heavy ice, high wind and other

harsh conditions. All elements are welded to the boom and the dipole design has an integral feed line welded to the boom for extra strength and electrical conductivity. This eliminates misalignment or fastener problems. The entire antenna is anodized for appearance and corrosion resistance. A heavy duty clamp is supplied which easily permits horizontal or vertical polarization.

Features:

  • Elements and boom are manufactured from aircraft quality 6061-T6 aluminum for optimum strength 
  • Antenna is anodized for corrosion resistance
  •       Antenna is supplied with a 2' pigtail (RG213) and N female connector
 

BMYD890K Series

The BMYD890K series has been engineered to meet the requirements of a high gain, broadband, premium quality antenna. The antenna has 10 dBd gain and operates in the 890-960 MHz range. The BMYD890 is manufactured using high strength 6061-T6 aluminum to withstand heavy ice, high wind and other

harsh conditions. All elements are welded to the boom and the dipole design has an integral feed line welded to the boom for extra strength and electrical conductivity. This eliminates misalignment or fastener problems. The entire antenna is anodized for appearance and corrosion resistance. A heavy duty clamp is supplied which easily permits horizontal or vertical polarization.

 

Features:

  • Elements and boom are manufactured from aircraft quality 6061-T6 aluminum for optimum strength
  • Antenna is anodized for corrosion resistance
  • Antenna is supplied with a 2' pigtail (RG213) and N female connector
 

BMYD890M Series

The BMYD890M series has been engineered to meet the requirements of a high gain, broadband, premium quality antenna. This antenna has 12 dBd gain and operates in the 890-960 MHz range. The BMYD890M is manufactured using high strength 6061-T6 aluminum to withstand heavy ice, high wind and other

harsh conditions. All elements are welded to the boom and the dipole design has an integral feed line welded to the boom for extra strength and electrical conductivity. This eliminates misalignment or fastener problems. The entire antenna is anodized for appearance and corrosion resistance. A heavy duty clamp is supplied which easily permits horizontal or vertical polarization.

Features:

  • Elements and boom are manufactured from aircraft quality 6061-T6 aluminum for optimum strength
  • Antenna is anodized for corrosion resistance
  • Antenna is supplied with a 2' pigtail (RG213) and N female connector
 

BMYD890O Series

The BMYD890O series has been engineered to meet the requirements of a high gain, broadband, premium quality antenna. This antenna has 14 dBd gain and operates in the 890-960 MHz range. The BMY890 is manufactured using high strength 6061-T6 aluminum to withstand heavy ice, high wind and other

harsh conditions. All elements are welded to the boom and the dipole design has an integral feed line welded to the boom for extra strength and electrical conductivity. This eliminates misalignment or fastener problems. The entire antenna is anodized for appearance and corrosion resistance. A heavy duty clamp is supplied which easily permits horizontal or vertical polarization.

Features:

  • Elements and boom are manufactured from aircraft quality 6061-T6 aluminum for optimum strength
  • Antenna is anodized for corrosion resistance
  • Antenna is supplied with a 2' pigtail (RG213) and N female connector 
      
 

 

 

1